Dear Peter Move the "mw2", "video" directory to "uclibc/include". And you compile the microwindows driver ,engine, fonts and mwin through "/src/Makefile". It generate the microwindows library. And then you make the mw application program by using microwin library. Example promgrams are included in "src/demos/mwin" BH Lee ----- Original Message ----- From: "1Pgg7M8=" To: Sent: Thursday, March 27, 2003 3:00 PM Subject: How to use the microwin.tar.bz2 > Dear BH Lee£¬ > > I downloaded the 24Mbytes "microwin.tar.bz2" file and use "tar -jxf microwin.tar.bz2" to extract it. But after I searched all the *.bin file in the directory and found they are all old. The date of bin file is 2002-12. Which bin file should I use? Or in what way shall re-build it? > > > Best Regards > > Peter > > > Peter > anambjo@a-1.net.cn > > ====================================================================================== /demos/mwin/mine.elf, mdemo.elf /demos/mwin/wintest.elf these file had been tested. ----- Original Message ----- From: "1Pgg7M8=" To: "???" Sent: Monday, March 31, 2003 10:51 AM Subject: Re: Re: about the microwin > Dear BH Lee, > > >Dear Peter > > > >1. /src/drivers/lcd.c , scr_lcd.c ==> lcd function > > /src/drivers/ts_marx.c ==> touch screen > > Thanks! I understand. > > > > >2. Yes, it can run on uclinux. > OK, which bin file in src/demos/mwin can directly run on uclinux? > > > > >BH Lee > >----- Original Message ----- > >From: "1Pgg7M8=" > >To: > >Sent: Friday, March 28, 2003 11:32 AM > >Subject: about the microwin > > > > > >> Dear BH Lee, > >> > >> 1. Does this microwin have the jupiter LCD driver? Where is it? > >> 2. Can this microwin run on jupiter uclinux platform? > >> > >> Best Regards > >> > >> Peter > >> anambjo@a-1.net.cn > >> > >> > > Ö > Àñ£¡ > > Peter > anambjo@a-1.net.cn > >